주메뉴 바로가기 본문 바로가기
KAIST AI-PIM PIM반도체연구센터

IP 검색

CMSS (CXL Memory Sub-System) Link Layer IP

CXL link-processing IP connecting CXL.cache and CXL.mem transaction interfaces to an external physical interface.

Converts transaction messages into flits and reconstructs received flits into request, response, and data messages.

Provides CRC-based error detection, credit-based flow control, acknowledgement handling, and retry/replay control.

Feature
· CPI request, response, and data interfaces for connection to the CMSS transaction-processing logic.
·
· Transmit packing and receive unpacking for protocol and all-data flits.
·
· Arbitration among new protocol traffic, link-control messages, and replay traffic.
·
· CRC16 generation and checking for transmission-error detection.
·
· Transmit and receive credit management with credit-return messaging.
·
· Link initialization and acknowledgement processing.
·
· Local and remote retry control with replay-buffer retransmission.
·
· Reference configuration with a 128-entry replay buffer and a 32-entry transmit FIFO.
·
· Transmit FIFO almost-full indication for upstream backpressure.
·
· Internal 512-bit protocol representation and 528-bit CRC-protected flit representation.
·
· PIPE interface for connection to an external PCIe PHY.
·
· APB configuration interface for software-visible link settings.
Application
· CXL-connected AI accelerators and heterogeneous computing systems.
·
· CXL.cache and CXL.mem transport
Business Area
CXL-connected accelerators and memory devices.
Category

Interface Controller & PHY


Interface Controller & PHY > CXL


Tech Specs
  • IP Name :

    CMSS (CXL Memory Sub-System) Link Layer IP

  • Provider :

    Scalable Architecture Lab, Sungkyunkwan University (SKKU)

  • FPGA Device :

    Intel Agilex 7 M-Series AGMA039R47A1E2VC

  • Foundry :

    Others

  • Bus Compliance :

    CPI, PIPE, AMBA APB

  • Technology :

    FPGA

Deliverables
· SystemVerilog RTL source for CMSS_CXL_TOP and its transmit and receive submodules.
·
· CPI channel adapters and protocol flit packing and unpacking logic.
·
· CRC16 generation and checking modules.
·
· Transmit and receive credit-management logic.
·
· Link initialization, acknowledgement, and retry-control state machines.
·
· Replay storage, transmit FIFO, arbitration, and backpressure logic.
·
· Protocol packages, CPI and PIPE interface definitions, and configuration-register sources.
Validation Status
· Transmit and receive RTL functionally verified using simulation.
·
· Flit formation checked against the intended CXL protocol structures.
·
· Transmission errors injected to verify CRC-based error detection.
·
· Negative acknowledgement generation checked following detected transmission errors.
·
· Replay-buffer retransmission checked following receipt of a negative acknowledgement, starting from the affected region.
Availability
Available as SystemVerilog RTL for integration into CXL device and accelerator memory subsystems.
Functional Diagram
Benefits
· Detects transmission errors using CRC16 and supports recovery through link-level retransmission.
·
· Retains transmitted information in a replay buffer until acknowledgement permits reclamation.
·
· Recovers affected transfers without requiring the accelerator to reconstruct the original transaction.
·
· Uses credit-based flow control to regulate transmission according to available receive resources.
·
· Coordinates protocol, control, and replay traffic through a shared transmit arbiter.
·
· Decouples upstream flit generation from physical-interface transmission using FIFO buffering and backpressure.
List